Hanson Sand Cement Mortar Ready Mixed 25kg Plastic Bag

Hanson Sand Cement Mortar is prepared by blending Hanson Cement, with Regen GGBS and building sand (conforming to BS EN 13139) and an air entrainment additive (to BS EN 934-2). When hardened the mortar will be brown/red in colour. Hanson Sand Cement Mortar meets the requirements of a category M6 mortar and is CE Marked with independent third party accreditation to BS EN 998-2. This product is commonly used for brick & block laying, pointing, patching, rendering and general sand and cement repairs A 20kg mortar ready mix bag will produce sufficient mortar to lay approximately 19 standard bricks. Compressive strength: Typically 6-11 N/mm2 after 28 days

Instructions for use: For best results, mix thoroughly using a mechanical mixer, empty the bag of Hanson Sand Cement Mortar into the mixer and blend until uniform. Slowly add clean water* mixing continuously to make the mix workable. Alternatively, empty the bag of Hanson Sand Cement Mortar onto a clean, flat moisture resistant surface, such as a mortar tray. Slowly add clean water mixing continuously to make the mix workable. The product is not compatible with bricklaying additives; it is formulated using an air entraining additive. One 20kg bag will require approximately 2.8L of water Once water is added and mixed, aim to use the mortar within 30 minutes.

Shipping Label: building supplies