Hanson Multi Purpose Concrete Ready Mixed 25kg Plastic Bag

Hanson Multipurpose Concrete is prepared by blending Hanson Cement , with Regen GGBS and aggregates (0/4mm sand and 4/10mm coarse aggregate, conforming to BS EN 12620). Hanson Multipurpose Concrete can be used for paths, drives, foundations and general concrete work. Recommended minimum thickness for concrete paths suitable for foot traffic is 75mm. For concrete driveways laid on well compacted foundations intended for vehicular traffic, 100mm is the recommended minimum thickness. Compressive strength: Typically 25 N/mm2 after 28 days

INSTRUCTION FOR USE All surfaces to be worked should be free from oil, grease and any loose material. The area where concrete is to be placed should be prepared to prevent loss of moisture from the wet concrete. For best results, mix thoroughly using a mechanical mixer, empty the bag of Hanson Multipurpose Concrete into the mixer and blend until uniform. Slowly add clean water until the desired consistency or slump characteristics are achieved. Alternatively, empty the bag of Hanson Multipurpose Concrete onto a clean, flat moisture resistant surface, such as a mortar tray. Slowly add clean water until the desired consistency or slump characteristics are achieved, by thoroughly mixing with the aid of a shovel or similar. Please note: The contents of the bag may segregate during transport and handling. To ensure satisfactory performance, the entire contents of the bag should be mixed thoroughly. If only part of the bag is required at a time mix together the entire contents on a clean, dry surface. Avoid adding too much water whilst mixing as this will weaken, affect the setting time, and affect the durability of the concrete mix. For best results, use the concrete within 30 minutes of mixing with water. Protect newly laid concrete from the weather until fully hardened. Concrete strengths are improved by keeping the concrete damp during hardening. Application temperature: +5°C to +35°C.

Shipping Label: building supplies